NE-9000 Peristaltic Dispensing Pump

• Pump from a reservoir through replaceable continuous tubing.
• Pump never comes into contact with fluid.
• Continuous Pumping. Up to 900 ml/min.
• Measured dispenses for production filling of bottles.
•  “Learn and Repeat”™ for quick setup of production dispenses.
• Computer and foot switch interface.

Description:
Have a need to accurately fill multiple bottles, vials, or other containers with a liquid? The “learn and repeat”™ mode of the NE-9000 Peristaltic Pump from New Era Pump Systems Inc. makes even the smallest of businesses highly productive right from day one. The NE-9000 is equipped to be used in many settings from the small home based businesses to the large factory floor. The pump can be integrated into existing production lines or simply used stand alone. The NE-9000 comes fully programmable and can be operated manually or with a PC through a RS-232 communication port. Even the most novice of technology users can easily operate the pump stand alone or through the PC. The pump's specialty is in small scale production dispensing. It will fill numerous bottles, vials, etc. with fluids of all types. Equipped for mass production dispensing at a price affordable for the home based business, this pump is a great deal no matter what your purchasing power is. The flow rates vary from a minimum of 0.041 ml/min to a maximum of 904.4 ml/min with 3/16 id tubing. Space Saving Chassis: Foot print size of only 7 3/4” x 5 1/4” Won't take up unnecessary space on your laboratory or production bench. Easy-to-use keypad interface.
Features:
Dispense or withdrawal pumping
• “Learn and Repeat”™
• Foot Switch control available.
• Slow down mode to improve accuracy of dispenses.
• Anti-Drip mode to stop oozing after dispenses.
• Calibration mode to improve accuracy.
• Programmable dispense volumes. Store and select from up to 40 dispenses.
• Non-volatile memory of all operating parameters and pumping program.
• Programmable Phases allowing complex pumping applications and interaction with external devices.
• RS-232 bi-directional control for complete control from a PC. Network up to 100 pumps and other devices.
• Digital logic input: TTL I/O with software filtered control inputs to eliminate glitches and ringing on the control inputs.
• Configurable TTL operational trigger for foot switches and other devices.
• Power Failure Mode: Restarts the Pumping Program after a power interruption.
• Audible Alarm
• Two year warranty

NE-300 "Just Infusion"™ Syringe Pump

Holds small or big syringes up to 60 mL
• Pumps continuously until you stop the pump
• Variable infusion rate can be changed while pumping
• Remembers previous settings on power up
• Power failure mode allows pump to continue pumping after a reset
• Syringe purge mode
• Displays total volume dispensed in mL or μL units
• Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
• Precise reproducible flow rates

NE-1200& DUAL-NE-1200

• Holds 2, 4, 6, 8, 10 or 12 syringes of upto 3 cc each
• Infusion rates from 0.57 μL/hr (1 cc syringe)
• to 153.2 ml/hr
• Higher flow rate models available

NE-1600&DUAL-NE-1600

• Holds 2, 4 or 6 syringes of up to 60 cc each
• or 2 or 4 syringes up to 140 cc each
• Infusion rates from 0.57 μL/hr (1 cc syringe)
• to 1337 ml/hr (60 cc syringe)
• Higher flow rate models available

NE-1800 & DUAL-NE-1800

• Holds 2, 4, 6 or 8 syringes of up to 10 cc each
• Infusion rates from 0.57 μL/hr (1 cc syringe)
• to 380 ml/hr (10 cc syringe)
• Higher flow rate models available

Continuous Infusion/Dual NE-1000 Syringe Pump

Description:

• Two NE-1000 Family of Syringe Pumps connected
• together are often used in dual-pump setups, possibly
• with check valves for continuous pumping or
• mixing so that one syringe dispenses while the other
• reloads. Gives customer flexibility to separate